EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Vacuum Blower
Vacuum Blower
Vacuum blowers are an essential piece of equipment in many industrial settings. They work to enhance airflow through the use of an electric motor, impeller and airfoils. Their purpose is to remove contaminants from the air such as dirt, dust, and move particulate matter.
FLP SINGLE STAGE VACUUME BLOWER
Product Price: Rs 55,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Stages | Single Stage |
| RPM | 3000 |
| Generator/Alternator Type | ELECTRIC |
| Blower Type | Air Blower |
| Air Flow Rate | 550 |
| Model Number | NS700-SS |
| Blower RPM | 2880 |
This turbine blower is a non-positive displacements, high, volume, pressure, blower that can operate as either a compressor or a vacuum pump. It is also known as other names such as regenerative blower, vortex blower and side channel blower. All of the names describe the basic principle of operation of the blower.
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners.
Features:
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Additional Information:
- Delivery Time: 4-5 Days
Yes! I am InterestedRequest A Callback
1 HP DOUBLE STAGE VACCUM BLOWER
Product Price: Rs 19,000 / PieceGet Best Price
Product Brochure
Product Details:
| Stages | Two Stage |
| Power | .75 |
| Material | Aluminium |
| RPM | 2500-3000 |
| Voltage | 415 V |
| Frequency | 50 HZ |
| Color | Silver |
| Brand | Naushakti |
| Warranty | 1 Years |
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners
Yes! I am InterestedRequest A Callback
1 HP SINGLE STAGE TURBINE BLOWER
Product Price: Rs 15,000 / PieceGet Best Price
Minimum Order Quantity: 5 Piece
Product Brochure
Product Details:
| Power | 0.75 KW |
| Generator/Alternator Type | Electric Blower |
| Automation Grade | LM6 |
| Air Flow Rate | 80 CFM |
| Blower RPM | 2880 RPM |
| Outlet Diameter | 2" BSP |
| Vacuum | -120 Mbar |
| Model No | RE100_SS |
| Country of Origin | Made in India |
1HP turbine blower is a non-positive displacements, high, volume, pressure, blower that can operate as either a compressor or a vacuum pump. It is also known as other names such as regenerative blower, vortex blower and side channel blower. All of the names describe the basic principle of operation of the blower.
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners.
Features:
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Additional Information:
- Item Code: 8450
- Production Capacity: 10
- Delivery Time: 2 Days
Yes! I am InterestedRequest A Callback
3 HP DOUBLE STAGE RING BLOWER
Product Price: Rs 33,000 / PieceGet Best Price
Minimum Order Quantity: 5 Piece
Product Brochure
Product Details:
| Power | 3 HP |
| Blower Type | Ring blower |
| Pressure | 350 Mbar |
| Motor Power | 2.2 kW |
| Flow Rate | 80 CFM |
| Fan Speed | 2000-3000 rpm |
| Power Source | Electric Blower |
| Brand | Naushakti |
| Color | Silver |
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners
Additional Information:
- Item Code: 8459
- Production Capacity: 10
- Delivery Time: 2 days
Yes! I am InterestedRequest A Callback
1 HP DOUBLE STAGE RING BLOWER
Product Price: Rs 18,900 / PieceGet Best Price
Minimum Order Quantity: 5 Piece
Product Brochure
Product Details:
| Power | 5 HP |
| Pressure | 250 Mbar |
| Flow Rate | 40 CFM |
| Blower Type | Ring blower |
| Power Source | Electric Blower |
| Fan Speed | 2000-3000 rpm |
| Brand | Naushakti |
| Color | Silver |
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners
Additional Information:
- Item Code: 8463
- Production Capacity: 10
- Delivery Time: 2 Days
Yes! I am InterestedRequest A Callback
1 HP DOUBLE STAGE TURBINE BLOWER
Product Price: Rs 19,500 / PieceGet Best Price
Minimum Order Quantity: 5 Piece
Product Brochure
Product Details:
| Power | .75 KW |
| Generator/Alternator Type | Electric Blower |
| Automation Grade | LM6 |
| Air Flow Rate | 40 CFM |
| Model Number | RE100_DS |
| Blower RPM | 2880 RPM |
| Vacuum | -250 Mbar |
| Country of Origin | Made in India |
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners
Yes! I am InterestedRequest A Callback
3 HP DOUBLE STAGE VACUUM BLOWER
Product Price: Rs 33,500 / PieceGet Best Price
Minimum Order Quantity: 5 Piece
Product Brochure
Product Details:
| Stages | Two Stage |
| Blower Type | Air Blower |
| RPM | 2500-3000 |
| Color | Silver |
| Power | 2.2 KW |
| Material | Aluminium |
| Voltage | 415 V |
| Frequency | 50 Hz |
| Brand | Naushakti |
| Warranty | 1 Years |
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners
Additional Information:
- Item Code: 8461
- Production Capacity: 10
- Delivery Time: 2 Days
Yes! I am InterestedRequest A Callback
5 HP DOUBLE STAGE VACCUM BLOWER
Product Price: Rs 55,000 / PieceGet Best Price
Minimum Order Quantity: 5 Piece
Product Brochure
Product Details:
| Blower Type | Air Blower |
| Stages | Two Stage |
| RPM | 2500-3000 |
| Color | Silver |
| Power | 3.7 KW |
| Material | Aluminium |
| Voltage | 415 V |
| Frequency | 50 Hz |
| Brand | Naushakti |
| Warranty | 1 year |
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners
Additional Information:
- Item Code: 8458
- Production Capacity: 10
- Delivery Time: 2 days
Yes! I am InterestedRequest A Callback
1.5 HP High Pressure Vacuum Blower
Product Price: Rs 18,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Voltage | 230/415 |
| Number Of Stages | Single stage |
| Frequency | 50/60 hz |
| Brand | Nau Shakti |
| Power | 1.1 kW |
| Usage/Application | Industrial |
| Speed | 2850 RPM |
| Phase | 3 Phase |
| Material | Aluminium |
Features:
Die Cast Impeller:
Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
Better grease retention, increased reliability
Motor shaft-mounted impeller:
Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
Protect bearing from contaminants for longer life
Improved Cooling fan Design:
Cools the motor and Blower, Quieter running and more efficient
Compact design:
Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Yes! I am InterestedRequest A Callback
1.5 HP Single Stage Vacuum Blower
Product Price: Rs 17,500 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Body Material | Aluminum |
| Number Of Stages | Single stage |
| Material | Aluminium |
| Usage/Application | Auto Ancillary Industry |
| Phase | 3 Phase |
| Brand | Nau Shakti |
| Model Name/Number | NS_150-SS |
| Pressure | 155 m bar |
| Weight | 36 kg |
| Motor Power | 1.5 HP |
| Capacity | 220 m3/hr |
| Vacuum | -145 m bar |
| Inlet & Outlet Size | 2 inch |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Yes! I am InterestedRequest A Callback
1 HP Double Stage Vacuum Blower
Product Price: Rs 22,000 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Body Material | Aluminum |
| Number Of Stages | Double Stage |
| Usage/Application | Industrial |
| Phase | 3 Phase |
| Brand | Nau Shakti |
| Model Name/Number | NS_100-DS |
| Pressure | 220 m bar |
| Weight | 27 kg |
| Motor Power | 1 HP |
| Capacity | 100 m3/hr |
| Vacuum | -195 m bar |
| Inlet & Outlet Size | 1.5 inch |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Additional Information:
- Delivery Time: 4 to 5 days
Yes! I am InterestedRequest A Callback
15 HP Single Stage Exhaust Vacuum Blower
Product Price: Rs 1,35,000 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Model Name/Number | NS_1500-SS |
| Body Material | Aluminum |
| Number Of Stages | Single stage |
| Usage/Application | Air or Gas Industry |
| Phase | 3 Phase |
| Brand | Nau Shakti |
| Pressure | 400 m bar |
| Weight | 150 kg |
| Motor Power | 15 HP |
| Capacity | 1000 m3/hr |
| Vacuum | -385 m bar |
| Inlet & Outlet Size | 5 inch |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Yes! I am InterestedRequest A Callback
0.33 HP Vacuum Blower
Product Price: Rs 9,000 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Body Material | Aluminum |
| Number Of Stages | Single stage |
| Phase | Single Phase |
| Brand | Nau Shakti |
| Motor Power | 0.33 HP |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Yes! I am InterestedRequest A Callback
0.5 HP Vacuum Blower
Product Price: Rs 11,000 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Body Material | Aluminum |
| Number Of Stages | Single stage |
| Phase | 3 Phase |
| Brand | Nau Shakti |
| Model Name/Number | NS_50-SS |
| Pressure | 90 m bar |
| Weight | 22 kg |
| Motor Power | 0.5 HP |
| Capacity | 90 m3/hr |
| Vacuum | -55 m bar |
| Inlet & Outlet Size | 1.25 inch |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Yes! I am InterestedRequest A Callback
0.75 HP Industrial Vacuum Blower
Product Price: Rs 13,900 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Body Material | Aluminum |
| Number Of Stages | Single stage |
| Usage/Application | Industrial |
| Phase | 3 Phase |
| Brand | Nau Shakti |
| Model Name/Number | NS_75-SS |
| Pressure | 125 m bar |
| Weight | 25 kg |
| Motor Power | 0.75 HP |
| Capacity | 100 m3/hr |
| Vacuum | -120 m bar |
| Inlet & Outlet Size | 1.25 inch |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Additional Information:
- Delivery Time: 4 to 5 days
Yes! I am InterestedRequest A Callback
1 HP Single Stage Vacuum Blower
Product Price: Rs 16,500 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Body Material | Aluminum |
| Number Of Stages | Single stage |
| Usage/Application | Industrial |
| Phase | 3 Phase |
| Brand | Nau Shakti |
| Model Name/Number | NS_100-SS |
| Pressure | 140 m bar |
| Weight | 27 kg |
| Motor Power | 1 HP |
| Capacity | 200 m3/hr |
| Vacuum | -130 m bar |
| Inlet & Outlet Size | 1.5 inch |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Yes! I am InterestedRequest A Callback
2 HP Vacuum Blower
Product Price: Rs 20,500 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Body Material | Aluminum |
| Number Of Stages | Single stage |
| Phase | 3 Phase |
| Brand | Nau Shakti |
| Model Name/Number | NS_200-SS |
| Pressure | 200 m bar |
| Weight | 40 kg |
| Motor Power | 2 HP |
| Capacity | 280 m3/hr |
| Vacuum | -165 m bar |
| Inlet & Outlet Size | 2 inch |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Additional Information:
- Delivery Time: 4 to 5 days
Yes! I am InterestedRequest A Callback
3 HP Single Stage Vacuum Blower
Product Price: Rs 26,500 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Model Name/Number | NS_300-SS |
| Body Material | Aluminum |
| Number Of Stages | Double Stage |
| Phase | 3 Phase |
| Brand | Nau Shakti |
| Pressure | 225 m bar |
| Weight | 40 kg |
| Motor Power | 3 HP |
| Capacity | 350 m3/hr |
| Vacuum | -220 m bar |
| Inlet & Outlet Size | 2 inch |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Additional Information:
- Delivery Time: 4 to 5 days
Yes! I am InterestedRequest A Callback
5 HP Single Stage Vacuum Blower
Product Price: Rs 39,000 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Body Material | Aluminum |
| Number Of Stages | Single stage |
| Usage/Application | Industrial |
| Phase | 3 Phase |
| Brand | Nau Shakti |
| Model Name/Number | NS_500-SS |
| Pressure | 250 m bar |
| Weight | 83 kg |
| Motor Power | 5 HP |
| Capacity | 500 m3/hr |
| Vacuum | -245 m bar |
| Inlet & Outlet Size | 2.5 inch |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Additional Information:
- Delivery Time: 4 to 5 days
Yes! I am InterestedRequest A Callback
7.5 HP Single Stage Vacuum Blower
Product Price: Rs 51,000 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Body Material | Aluminum |
| Number Of Stages | Single stage |
| Usage/Application | Industrial |
| Phase | 3 Phase |
| Brand | Nau Shakti |
| Model Name/Number | NS_750-SS |
| Pressure | 270 m bar |
| Weight | 100 kg |
| Motor Power | 7.5 HP |
| Capacity | 620 m3/hr |
| Vacuum | -260 m bar |
| Inlet & Outlet Size | 3.5 inch |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Additional Information:
- Delivery Time: 4 to 5 days
Yes! I am InterestedRequest A Callback
10 HP Single Stage Vacuum Blower
Product Price: Rs 75,000 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Body Material | Aluminum |
| Number Of Stages | Single stage |
| Usage/Application | Industrial |
| Phase | 3 Phase |
| Brand | Nau Shakti |
| Model Name/Number | NS_1000-SS |
| Pressure | 350 m bar |
| Weight | 130 kg |
| Motor Power | 10 HP |
| Capacity | 800 m3/hr |
| Vacuum | -340 m bar |
| Inlet & Outlet Size | 4 inch |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Additional Information:
- Delivery Time: 4 to 5 days
Yes! I am InterestedRequest A Callback
12.5 HP Single Stage Vacuum Blower
Product Price: Rs 85,000 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Body Material | Aluminum |
| Number Of Stages | Single stage |
| Usage/Application | Industrial |
| Phase | 3 Phase |
| Brand | Nau Shakti |
| Weight | 140 kg |
| Motor Power | 12.5 HP |
| Capacity | 900 m3/hr |
| Inlet & Outlet Size | 4.5 iinch |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Additional Information:
- Delivery Time: 4 to 5 days
Yes! I am InterestedRequest A Callback
20 HP Industrial Vacuum Blower
Product Price: Rs 1,70,000 / PieceGet Best Price
Product Brochure
Product Details:
| Type | Vacuum Blower |
| Body Material | Aluminum |
| Number Of Stages | Single stage |
| Usage/Application | Industrial |
| Brand | Nau Shakti |
| Phase | 3 Phase |
| Model Name/Number | NS_2000-SS |
| Pressure | 460 m bar |
| Weight | 160 kg |
| Motor Power | 20 HP |
| Capacity | 1500 m3/hr |
| Vacuum | -450 m bar |
| Inlet & Outlet Size | 5.5 inch |
Features:
Die Cast Impeller:
Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
Better grease retention, increased reliability
Motor shaft-mounted impeller:
Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
Protect bearing from contaminants for longer life
Improved Cooling fan Design:
Cools the motor and Blower, Quieter running and more efficient
Compact design:
Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Additional Information:
- Delivery Time: 4 to 5 days
Yes! I am InterestedRequest A Callback
3 HP DOUBLE STAGE TURBINE BLOWER
Product Price: Rs 33,500 / PieceGet Best Price
Minimum Order Quantity: 5 Piece
Product Brochure
Product Details:
| Generator/Alternator Type | Electric Blower |
| Power | 2.2 KW |
| Automation Grade | LM6 |
| Air Flow Rate | 80 CFM |
| Model Number | RE300_DS |
| Blower RPM | 2880 RPM |
| Vacuum | - 300 Mbar |
| Country of Origin | Made in India |
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners
Additional Information:
- Item Code: 8460
- Production Capacity: 10
- Delivery Time: 2 Days
Yes! I am InterestedRequest A Callback
4 HP SINGLE STAGE TURBINE BLOWER
Product Price: Rs 32,000 / PieceGet Best Price
Product Brochure
Product Details:
| Power | 3 HP |
| Generator/Alternator Type | Electric |
| Automation Grade | LM 6 |
| Air Flow Rate | 200 CFM |
| Model Number | RE500_SS |
| Blower RPM | 2880 RPM |
| Outlet Diameter | 2" BSP |
| Vacuum | - 280 Mbar |
| Country of Origin | Made in India |
4HP turbine blower is a non-positive displacements, high, volume, pressure, blower that can operate as either a compressor or a vacuum pump. It is also known as other names such as regenerative blower, vortex blower and side channel blower. All of the names describe the basic principle of operation of the blower.
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners.
Features:
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Yes! I am InterestedRequest A Callback
4 HP SINGLE STAGE VACUUM BLOWER
Product Price: Rs 31,800 / PieceGet Best Price
Product Brochure
Product Details:
| Stages | Single Stage |
| RPM | 2500-3000 |
| Blower Type | Air Blower |
| Power | 3.2 KW |
| Material | Aluminum |
| Voltage | 415 V |
| Color | Silver |
| Frequency | 50 Hz |
| Brand | Naushakti |
| Warranty | 1 Year |
4HP Vacuum blower is a non-positive displacements, high, volume, pressure, blower that can operate as either a compressor or a vacuum pump. It is also known as other names such as regenerative blower, vortex blower and side channel blower. All of the names describe the basic principle of operation of the blower.
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners.
Features:
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Yes! I am InterestedRequest A Callback
5 HP DOUBLE STAGE RING BLOWER
Product Price: Rs 55,500 / PieceGet Best Price
Minimum Order Quantity: 5 Piece
Product Brochure
Product Details:
| Blower Type | Ring blower |
| Power | 5 HP |
| Power (HP) | 5 HP |
| Pressure | 400 Mbar |
| Fan Speed | 2000-3000 rpm |
| Power Source | Electric |
| Brand | Naushakti |
| Flow Rate | 100 CFM |
| Color | Silver |
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners
Additional Information:
- Item Code: 8457
- Production Capacity: 10
- Delivery Time: 2 days
Yes! I am InterestedRequest A Callback
Vacuum Pressure Turbine Blower
Product Price: Rs 20,000 / PieceGet Best Price
Product Brochure
Product Details:
| Power | 2 HP |
| Air Flow Rate | 230 |
| Model Number | RE200-SS |
| Blower RPM | 2880 |
| Outlet Diameter | 2'' |
| Vacuum | -200 |
Yes! I am InterestedRequest A Callback
Dust Cleaning Blower
Product Price: Rs 45,000 / PieceGet Best Price
Minimum Order Quantity: 5 Piece
Product Brochure
Product Details:
| Power | 5 HP |
| Air Volume | 500 |
| Model Name/Number | CB500 SS |
| Warranty | 1 year |
| Nozzle Size | 2 |
| Country of Origin | Made in India |
Additional Information:
- Production Capacity: 3
- Delivery Time: 6-7
Yes! I am InterestedRequest A Callback