- Home
- ยป
- Our Products
- »
- Centrifugal Blower
Centrifugal Blower
HP Centrifugal Industrial Blower is used to remove dust, dirt, smoke, fumes, odors, gases, mist, and other airborne particles from air or gas streams. They can be used as part of an exhaust system, or they can be installed directly into ducts or pipes.
Ms Blower Fans
Minimum Order Quantity: 5 Piece
Product Brochure
Blower Type | Air Blower |
Speed | Upto 2000 RPM |
RPM | 1500-2000 |
Color | Blue |
Pressure | Medium Pressure |
Power | 5 HP |
Material | MS |
Power Source | Pneumatic |
Country of Origin | Made in India |
Additional Information:
- Item Code: 4577
- Production Capacity: 5
- Delivery Time: 4 days
Heavy Duty Industrial Blower
Product Brochure
Blower Type | Centrifugal Blower |
Air Flow Rate | 3001-3500 CFM |
Power | 5 HP |
RPM | 1500-2000 |
Color | Silver |
Phase | Three Phase |
Payment Terms | 100% against Proforma Invoice |
Product Type | Air Blower |
Forced Draft Fan
Minimum Order Quantity: 1 Piece
Product Brochure
Type | Centrifugal Fan |
Fan Speed | 1501-2000RPM |
Material | MS |
Power | 10 HP |
Voltage | 415 V |
Capacity | 1500 CFM |
Impeller Size | 2200 |
Pressure | 200 MMWC |
Our draft blowers are high volumetric and are generally used to handle hot gases or hot air. the blowers may be direct driven type, but above this they are either belt driven or driven through flexible couplings. Induced draft blowers can be supplied in M.S., S.S.
Additional Information:
- Item Code: 8423
- Production Capacity: 1
- Delivery Time: 1 WEEK
3 HP SINGLE STAGE VACUUME BLOWER
Minimum Order Quantity: 1 Piece
Product Brochure
Blower Type | Air Blower |
Stages | Single Stage |
Power | 3 |
RPM | 2500-3000 |
Material | ALUMINIUM |
Voltage | 415 |
Color | Silver |
Brand | NAUSHAKTI |
Warranty | 1 |
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodi
Additional Information:
- Delivery Time: 1-2
7.5 HP DOUBLE STAGE TURBINE BLOWER
Minimum Order Quantity: 1 Piece
Product Brochure
Generator/Alternator Type | Electricity |
Power | 7.5 |
Air Flow Rate | 310 |
Model Number | RE750-DS |
Blower RPM | 2880 |
Outlet Diameter | 2'' |
Vacuum | -400 |
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodi
Additional Information:
- Delivery Time: 1-2
Stainless Steel Blower
Product Brochure
Blower Type | Centrifugal Blower |
Speed | 1880 RPM |
Power Source | Electric Blower |
Power | 2.2Kw |
Color | Silver |
Material | Stainless Steel |
Air Turbine Blower
Minimum Order Quantity: 3 Piece
Product Brochure
Power | 10 HP |
Generator/Alternator Type | Electric Blower |
Automation Grade | LM 4 |
Air Flow Rate | 400 CFM |
Model Number | RE1000-SS |
Blower RPM | 2880 |
Outlet Diameter | 2.5 " |
Vacuum | - 380 Mbar |
Country of Origin | Made in India |
Additional Information:
- Production Capacity: 5
- Delivery Time: 4 days
Heavy Duty Industrial Hot Air Blower
Minimum Order Quantity: 1 Piece Onwards
Product Brochure
Material | Mild Steel |
Temperature Range | 350 DegreeF |
Power | 1 HP |
Air Flow Rate | 500 CMH |
Phase | Three Phase |
Brand | Nau Shakti |
Usage/Application | Steel Plant, Cement Industry, Sugar Mill, Automobile Industry, Textile Industry, Leather Industry |
Units Sold Till Date | 11342 |
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Air Flow Rate: 500 to 200000 CMH
3 HP Turbo Blowers
Product Brochure
Blower Type | Air Blower |
Speed | 1440 |
RPM | 1000-1500 |
Color | Blue |
Pressure | Low Pressure |
Power | 5 HP |
Material | Cast iron |
Brand | RE Make |
Main Domestic Market | Maharshtra |
Product Type | Air Blower |
The Turbo Blower is designed to blow large volumes of air, non-positive displacements, high, volume, pressure, blower that can operate as either a compressor or a vacuum pump.
1 HP SINGLE STAGE VACUUME BLOWER
Product Brochure
Blower Type | Air Blower |
Stages | Single Stage |
Power | 0.75 Kw |
RPM | 2500-3000 |
Material | Aluminium |
Voltage | 230 V |
Frequency | 50 Hz |
Color | Silver |
Brand | Naushakti |
Warranty | 1 Year |
3 HP SINGLE STAGE RING BLOWER
Minimum Order Quantity: 5 Piece
Product Brochure
Power | 3 HP |
Fan Speed | 2000-3000 rpm |
Power Source | 415 |
Blower Type | Ring blower |
Brand | Naushakti make |
Pressure | 225 Mbar |
Flow Rate | 200 cfm |
Color | Silver |
Weight | 30 kg |
Air Flow Rate | 280 CMH |
Frequency | 50 Hz |
Noise Level | 75 DB |
Speed | 2880 RPM |
3HP Ring blower is a non-positive displacements, high, volume, pressure, blower that can operate as either a compressor or a vacuum pump. It is also known as other names such as regenerative blower, vortex blower and side channel blower. All of the names describe the basic principle of operation of the blower.
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners.
Features:
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Additional Information:
- Item Code: 8436
- Production Capacity: 20
- Delivery Time: 2 days
Backword Curved Blowers
Product Brochure
Type of Centrifugal Blowers | Belt Driven Blower |
Usage/Application | Industrial |
Pressure | Medium Pressure |
Power Source | Electric Blower |
Blower Type | Centrifugal Blower |
Electric Current Type | AC |
Boiler Fans
Minimum Order Quantity: 1 Piece
Product Brochure
Material | Mild Steel |
Fan Speed | 1440 |
Power | 5 HP |
Capacity | 750 CMH |
Type | V-Belt Driven Units |
Frequency | 50 Hz |
Additional Information:
- Item Code: 8431
- Production Capacity: 1
- Delivery Time: 1 week