- Home
- ยป
- Our Products
- »
- High Pressure Blower
High Pressure Blower
Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
Better grease retention, increased reliability
Motor shaft-mounted impeller:
Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
Protect bearing from contaminants for longer life
Improved Cooling fan Design:
Cools the motor and Blower, Quieter running and more efficient
Compact design:
Space saving design makes it easier for OEM's to incorporate the blower into their equipment
1 HP Double Stage Vortex Blower
Product Brochure
Blower Type | Vortex Blower |
Body Material | Aluminum |
Pressure | 220 m bar |
Phase | 3 Phase |
Brand | Nau Shakti |
Model Name/Number | NS_100-DS |
Motor Power | 1 HP |
Weight | 27 kg |
Vacuum | -195 m bar |
Inlet & Outlet Size | 1.5 inch |
Capacity | 100 m3/hr |
Stage | Double |
- This design with its twin vortices is characterized by higher noise levels.
- Double Stage Vortex Blower as the vortices are created at the inlet and merged at the discharge.
- These blowers have two seal gaps between the housing and impeller, complicating tolerances during operation at high ambient temperatures.
Additional Information:
- Delivery Time: 4 to 5 days
Double Stage Turbine Blower
Product Brochure
Blower Type | Turbine Blower |
Body Material | Aluminum |
Application | Electro Plate |
Pressure | 220 m bar |
Weight | 27 kg |
Stage | Double |
Brand | Nau Shakti |
Motor Power | 1 HP |
Capacity | 100 m3/hr |
Inlet & Outlet Size | 1.5 inch |
Vacuum | -195 m bar |
Model Name/Number | NS_100-DS |
Phase | 3 Phase |
This turbine blower is a non-positive displacements, high, volume, pressure, blower that can operate as either a compressor or a vacuum pump. It is also known as other names such as regenerative blower, vortex blower and side channel blower. All of the names describe the basic principle of operation of the blower.
The blower consist of an impeller mounted directly on a motor shaft and is rotated at a high speed of about 2900 RPM on the periphery of the impeller.
The turbine blower is ineffective, a multi stage compressor with each regeneration of the air becoming another “stage”.
The basic construction of a turbine blower means that the only moving part is the impeller. Nothing touching except bearings. The method of compression means that there is no requirement for lubrication in the compression chamber. The discharge air is oil-less, no oil aerosols are present in the discharge air, nor carbon dust generated by sliding wanes. The blowers should be mounted vertically or horizontally.
Construction:
Turbine blower is designed to meet the most critical application requirements. Each features an impeller, mounting base and housing manufactured of aluminum for maximum strength, reduced weight an increased corrosion resistance. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blower's impellers are dynamically balanced to virtual eliminate vibration while increasing overall long-termreliability. All the models have a shaft oil-seal between the impellers and bearing as well as double shield bearing to reduce the possibility of foreign material in influx and preclude air contamination.
Applications:
Air pollution monitoring equipments, hopper loader, vacuum Lifting, gas transferring, Electroplating plant, Effluents treatment plant, waste water treatment plants, manufacturing of textiles, medical Laboratory and measuring equipments, printing and paper handling, vacuum packaging, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners.
Features:
Die Cast Impeller:
- Promotes smoother air flow and higher volumetric efficiency.
Thermal Protector Built-In:
- Protects the motors from overheating for greater reliability
Dynamically Balanced Impeller:
- Smoother operation, Allows vibration free installation in OEM equipment
Suction & Discharge Silencer:
- Reduces noise levels to below OSHA standards. Make it more comfortable for employees working rear the blowers
Double shielded shaft bearing:
- Better grease retention, increased reliability
Motor shaft-mounted impeller:
- Eliminates the need for couplings, belts or gears, Nothing to break or wear out.
Motors-Wide voltage & Frequency Range:
- Minimizes OEM inventory requirements
Dust-Proof Shaft Seal:
- Protect bearing from contaminants for longer life
Improved Cooling fan Design:
- Cools the motor and Blower, Quieter running and more efficient
Compact design:
- Space saving design makes it easier for OEM's to incorporate the blower into their equipment
Furnace Burner Blower
Minimum Order Quantity: 6 Piece
Product Brochure
Blower Type | Centrifugal Blower |
Fan Speed | 1001-2000 RPM |
RPM | 1500-2000 |
Color | Blue |
Pressure | High Pressure |
Power Source | Electric Blower |
Power | 5 HP |
Material | Mild Steel |
Product Type | Air Blower |
Country of Origin | Made in India |
Additional Information:
- Item Code: 8470
- Production Capacity: 10
High Pressure Centrifugal Air Blower
Minimum Order Quantity: 1 Piece
Product Brochure
Material | Mild Steel |
Blower Type | Centrifugal Blower, Fabricated |
Usage/Application | Steel Plant, Cement Industry, Sugar Mill, Automobile Industry, Textile Industry, Leather Industry |
Speed | 1450 RPM |
Brand | RE MAKE |
We are offering Multi Stage Fabricated High Pressure Blower to our clients.
Centrifugal Industrial Blower is used to remove dust, dirt, smoke, fumes, odors, gases, mist, and other airborne particles from air or gas streams. They can be used as part of an exhaust system, or they can be installed directly into ducts or pipes.
Twin lobe Blowers
Product Brochure
Blower Type | Twin Lobe Blower |
Power | 10 Hp |
Material | Cast Iron |
Brand | Nau Shakti |
Country of Origin | Made in India |